Phoenix Cycles is a Premier Retailer and Workshop, the highest status given by Brompton, giving you piece of mind when having your Brompton or any other brand bicycle serviced.
Brakes and gears adjusted and checked. Derailleur hanger checked for alignment if applicable. Chain lubricated with premium oil. Tyres and wheels checked for true and pressure, then adjusted if needed. Full bolt torque check of major, safety critical fittings.
As per the Safety Check with the addition of; new brake pads, cables, chain and sprockets fitted if needed. Remaining components cleaned in the part washer. Hub cones checked for movement and adjusted if needed. Frame wiped over and checked for damage and alignment. Seat post removed and anti seize applied to frame. Any accessories purchased from us can be fitted if requested.
Complete strip down of the bike to component parts. Frame checked for damage and alignment. Seat post removed and anti seize applied. The frame is then cleaned with premium cycle specific cleaners and polished where possible. Deep clean of all components in the parts washer. Wheel hubs stripped and serviced using premium cleaners and greases. Wheels trued, spoke tension checked. Tyres checked for debris and inflated. The bike is then rebuilt, fitting any replacement parts as needed. This service includes a free of charge on the spot, if booked, tune up after a week or so of use to readjust brakes and gears to take into account of cable stretch.
In most cases work will be completed on the day of booking, depending on parts availability.
Courtesy Bromptons are available on request, please mention this at time of booking if required.
The prices shown are exclusive of parts unless stated and should be used as a guide. All work will be quoted before we begin.